Samsung 630 User Manual page 16

Basic Features
Size : Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTERE button.
3. Press the or
or down.
4. Press the ENTERE button.
5. Press the button to select Reset.
6. Press the ENTERE button to reset the picture
to its default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the or
2. Press the ENTERE button.
3. Press the
, ,
picture.
4. Press the ENTERE button.
5. Press the or
6. Press the ENTERE button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
16
English
P.SIZE
button to move the picture up
button to select Position.
or button to move the
button to select Reset.
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
16:9, 4:3
Digital Noise filter (Off / Low / Medium / High / Auto /
Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabled under PC mode.
HDMI Black Level (Normal / Low) : Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2) : Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Motion Plus 120Hz (Off / Clear / Standard /
Smooth / Custom / Demo): Enhances motion in fast
moving scenes.
Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.