Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do
not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device
for safety purposes, as follows.
To prevent the TV from falling
1. Unscrew a screw attached on the back of your TV, then connect the TV-Holder [
Make sure to only use the supplied screw.
2. Firmly fasten the screw to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the
screw fastened on the wall or cabinet so that the TV is ﬁxed.
Purchase the screws to be used on the wall or cabinet separately.
Install the TV close to the wall so that it does not fall.
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
Confi rm that the cord or link does not come loose frequently.
Before moving the TV, separate the connected cord first.
Use the Wood screw (sold separately) from the size M4x20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any
doubt about the security of your connections, contact a professional installer.
Securing the TV to the Wall
(M6 X 16)
Screw 1 (40 inch TV)
(M8 X 19)
Screw 2 (46 ~ 55 inch TVs)
] with the screw through the hole.