Oner CT02-RFID User Manual page 11

Real Time Tracking
To do real time tracking to car, and get location info, map link or detail address.
Command
W******,000
(Live track）
W******,100
(Map Link Inquiry )
W******,111
(Detail Address Inquiry）
Alert Setting
To set multiple alerts and notification No. When alert actives, alert message will be sent to these numbers.
Command
W******,003,3,1,T1,T2,T3
(Alert Notification No.)
W******,005,XX
(Overspeed Alert)
W******,006,XX
(Geofence Alert)
W******,004,n
(Low Power Alert)
W******,008,X
(External Power Cut Alert)
ONER GPS Vehicle Tracker
User Manual
Description
To get current location info. ******=000000
I.E.:W000000,000
ID=21451100,ACC=ON, 23.163678N,113.313711E,
0.0KM/H,10KM,2015.08.11 08：05
To get Google map link of location. ******=000000
I.E.: W000000,100
http://maps.google.com/-
maps?f=q&hl=en&q=6.46022,3.314953&ie=UTF8&z=16&iwloc
=addr&om=1
To get detail address, first need to set device to work
in the tracking system.
I.E.: W000000,111 Reply：No.512,guangzhou
dadao bei, tianhe district.
Description
When Alert active, alert message will be sent to these No. .
Support setting 3 numbers. ******=000000
T1,T2,T3=phone number，max 16 digits
when set 1 number only, others enter 0
I.E.W000000,003,3,1,08455101,0,0
When car is moving over the speed limit, alert active
******=000000. XX=00 close(default)
XX=01-12 ,Unit：10KM/H
I.E: W000000,005,08 Speed limit: 80KM/H
To set an area (current location as central point, set radius),
when the car leaves this area, alert active.
******=000000.XX=00, close (default)
XX=01，30m；XX=02，50m; XX=03，100m；
XX=04，200m; XX=05，300m；XX=06，500m;
XX=07，1000m；XX=08，2000m;
When power is lower than the preset value, alert active,
can be used to car battery detecting
******=000000.n=0-24V，n=0, close(default)
I.E.: W000000,004,3 power voltage<3V, alert active
When external power of tracker is removed, alert active,
that mean some one finds device in the car, and remove it
******=000000. X=0,close (default)，X=1，active
I.E.: W000000,008,1
Command list
8