Weslo easy compact 2 WETL20709.0 User Manual
  1. Manuals
  2. Brands
  3. Weslo Manuals
  4. Treadmill
  5. easy compact 2 WETL20709.0
  6. User manual
Weslo easy compact 2 WETL20709.0 User Manual

Weslo easy compact 2 WETL20709.0 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
Model No. WETL20709.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if there
are missing parts, please contact
us at the numbers or addresses
listed below:
Call: 08457 089 009
Outside UK: 0 (44) 113 3877133
Fax: 0 (44) 113 3877125
E-mail: csuk@iconeurope.com
Website: www.iconsupport.eu
Write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
www.iconeurope.com

Advertisement

Table of Contents
loading

Related Manuals for Weslo easy compact 2 WETL20709.0

Summary of Contents for Weslo easy compact 2 WETL20709.0

  • Page 1 USER'S MANUAL Model No. WETL20709.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, please contact us at the numbers or addresses listed below: Call: 08457 089 009 Outside UK: 0 (44) 113 3877133 Fax: 0 (44) 113 3877125...

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc.

  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
  • Page 4 20. Do not attempt to raise, lower, or move the 24. Never drop or insert any object into any treadmill until it is properly assembled. (See opening on the treadmill. DANGER: ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 15.) Always unplug the power You must be able to safely lift 45 lbs.

  • Page 5: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the new WESLO EASY COM- ing this manual, please see the front cover of this man- ® PACT 2 treadmill. The EASY COMPACT 2 treadmill of- ual. To help us assist you, note the product model fers a selection of features designed to make your work- number and serial number before contacting us.

  • Page 6: Assembly

    ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
  • Page 7 1. Identify the Right Handrail (86), which is marked with an “R” sticker or a “Right” sticker. Have a Wire Tie second person hold the Right Handrail near the tube on the Base (79). See the inset drawing. Tie the wire tie in the Right Handrail securely around the end of the Wire Harness (84).
  • Page 8 3. Attach the Console Plate (81) to the Handrail Crossbar (83) with two M8 x 16mm Bolts (1) and two M8 Star Washers (5). Make sure the Console Plate is oriented as shown and that the Wire Harness (84) is not pinched. Remove the wire tie from the Wire Harness (84).
  • Page 9 5. Set the Console (80) on the Console Plate (81), and insert the excess wire into the Handrail Crossbar (83). Make sure that no wires are pinched. Attach the Console (80) with four M4.2 x 12mm Screws (3); start all four Screws before tight- ening any of them.
  • Page 10 8. Raise the Frame (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 15). Be Bracket careful not to crack the Motor Hood (not shown). Raise the Gas Spring (76) to a vertical position with the cylinder on the bottom as shown. See the two small inset drawings.

  • Page 11: Operation And Adjustment

    OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD Socket on Treadmill This product must be earthed.
  • Page 12 CONSOLE DIAGRAM Thumb Pulse Sensor IMPORTANT: If the treadmill has been exposed to into the console. After a moment, the displays will light. cold temperatures, allow it to warm to room tem- IMPORTANT: In an emergency situation, the key perature before turning on the power. If you do not can be pulled from the console, causing the walk- do this, you may damage the console displays or ing belt to slow to a stop.
  • Page 13 HOW TO USE THE CONSOLE The upper half of the display is the priority display. The priority display can show the elapsed time, the 1. Insert the key into the console. distance that you have walked or run, the speed of the walking belt, or the approximate number of See page 12.
  • Page 14 4. Measure your heart rate if desired. HOW TO CHANGE THE INCLINE OF THE TREADMILL To measure your heart rate, stand on the foot To vary the intensity of your exercise, the incline of the rails and place your left thumb on the pulse sensor treadmill can be changed.

  • Page 15: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1.
  • Page 16 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your left hand. Pull the latch knob to the right and hold it. It may be nec- essary to push the frame forward as you pull the knob to the right.

  • Page 17: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
  • Page 18 Locate the Reed Switch (88) and the Magnet (41) on the left side of the Pulley (43). Turn the Pulley until the 1/8 in. Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in.

  • Page 19: Exercise Guidelines

    EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 20: Part List

    PART LIST—Model No. WETL20709.0 R0509A Key No. Qty. Description Key No. Qty. Description M8 x 16mm Bolt Incline Leg Pad M6 x 10mm Bolt Incline Leg M4.2 x 12mm Screw Motor Hood 1/4" Star Washer Motor Bracket M8 Star Washer Left Roller Bracket 4 mm Hex Hey Base Cap...

  • Page 21: Exploded Drawing

    EXPLODED DRAWING A—Model No. WETL20709.0 R0509A...
  • Page 22 EXPLODED DRAWING B—Model No. WETL20709.0 R0509A...
  • Page 23 EXPLODED DRAWING C—Model No. WETL20709.0 R0509A...

  • Page 24: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to pro- vide the following information when contacting us: • the model number and the serial number of the product (see the front cover of this manual) •...

Table of Contents