Uniden U2 Instruction Manual page 4

Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
!
• Turn AC power OFF at the mains before working on any
electrical connections.
• All AC power wiring and coaxial cable wiring must conform
to local or national codes.
• The AC line voltage must be within 10% of the voltage
specified for the booster.
• A solid copper conductor no less than No. 8 AWG should be
connected to ground.
• DO NOT connect a ground wire to a gas supply line.
• DO NOT open the booster.There are no serviceable
parts inside.
Touching internal parts could cause damage from static electrical
discharge.
Opening the base unit DOES VOID THE WARRANTY.
SAFETY AND WARNINGS
4