Table of Contents
Advertisement
Contact Tech Support at 1.800.215.7015 or email at support@unidencellular.com
RUN COAXIAL CABLE
Loosely run the coaxial cable from your outdoor antenna to your booster.
(after you have tested the system you can permanently secure the coaxial cable).
As you route and pull cabling, follow these general
guidelines:
• Bend cables and route them smoothly, and protect the outer skin against any
damage.
• Keep horizontal cables straight and fasten them with a tie every three to
five feet.
• Bind and fasten vertical cables every six to eight feet.
• Waterproof all outdoor connections with silicone caulking
• Be careful when plugging the connector in so as not to damage the center pins
on the connectors.
INSTALL THE SIGNAL (OUTDOOR) ANTENNA.
Mount the signal (outdoor) antenna
The signal antenna should be located as high as possible in order to capture the
best quality signal from the cellular tower.
Use the mounting hardware in the kit to attach the signal (outdoor) antenna to the
building.
Connect the signal (outdoor) antenna:
Connect the supplied coaxial cable to the antenna. We recommend applying
silicone caulking to fully waterproof the connection.
Attach the cable in such a way that a drip loop is formed. (see image next page).
Once mounted, connect one end of the coaxial cable to the signal (outdoor)
antenna and the other end to the cellular booster where it is marked "outdoor".
11
Hide quick links:
Advertisement
Table of Contents
