Marantz PM7001KI User Manual page 15

NAMES AND FUNCTIONS OF PARTS
7 7 7 7 7 For use of Remote controller
• Loading batteries
Before using the remote controller for the first time, load
the batteries in the remote controller. The batteries provided
are used to verify the operations of the remote controller
only.
1.
Remove the battery cover which is found on the back side
of the remote controller.
2.
Load the two new size "AA" batteries inside the battery
compartment while taking care to align their polarities correctly
with the polarity markings (
3.
Push the cover on the back side in the direction of the arrow
to close.
10
with and with ).
7 7 7 7 7 Operatable range of Remote controller
Operate the remote controller (RC4001PM) within a
distance of approx. 5m from the infrared receptor window
on the front of the PM7001.
Approx. 5m
Remote controller (RC4001PM)
• Caution
• Do not allow direct sunlight, an inverter fluorescent light or
other strong source of light to shine onto the player's
infrared receptor window. Otherwise, the operation of the
remote controller may be disabled.
• Bear in mind that operating the remote controller may cause
other devices operated by infrared rays to be operated by
mistake.
• The remote controller cannot be operated if the space
between the controller and the player's infrared reseptor
window is obstructed.
• Do not place any objects on top of the remote controller.
Doing so may cause one or more buttons to be held down
which will cause the batteries to run down.