Remote Control - Panasonic SA-XR15 Operating Instructions Manual

Control guide

Remote control

Buttons not explained on this page are used only to operate other equipment. Refer to the separate Remote
Control Operation Guide for details.
[^, RECEIVER]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and
channels.
[ > = 10, ENTER]
To enter two digit channels.
[DISC, DIRECT TUNING]
To enable selection of radio stations
by frequency.
[DIMMER]
For dimming the unit's display and
turning off the panel light.
[INPUT MODE]
For selecting AUTO, ANALOG or
DIGITAL.
[SLEEP]
To start the sleep timer.
[STEREO/2CH MIX]
For selecting STEREO or 2CH MIX
mode.
[DOLBY PRO LOGIC 2 2 ]
For selecting a Dolby Pro Logic 2
mode:
MOVIE, MUSIC or PANORAMA.
[SFC]
For selecting SFC modes.
[TEST]
To start the speaker test signal.
14
RECEIVER
RECEIVER AV SYSTEM
DVD TV
^ ^
FM AM AUX
VCR
1 2 3
CH
4 6
5
VOLUME
7
8 9
DIRECT TUNING ENTER
>
0 10
=
DISC
SLOW / SEARCH
SKIP
u i t y
– TV VOL +
h
TOP MENU
MENU
DIRECT PLAY
NAVIGATOR
LIST
ENTER
DISPLAY RETURN
TV/VIDEO DIMMER SUBWOOFER MUTING
INPUT MODE TONE –/L +/R
SLEEP BALANCE LEVEL EFFECT
STEREO/ DOLBY
SFC TEST
2CH MIX PRO LOGIC
For your reference
¡When using the subwoofer
Sound can be distorted if you raise the volume while subwoofer
level is high. Reduce subwoofer level if this occurs.
¡When muting is on
Muting is also canceled when the unit is turned off.
[DVD, TV, FM, AM, VCR]
Input mode and remote control mode
buttons.
[AUX]
To select auxiliary (AUX) input.
[1, CH, 2]
For selecting preset radio channels.
[+, –, VOLUME]
To adjust the volume.
[SUBWOOFER]
For selecting subwoofer level.
Adjust the level in 5 steps:
SW MIN, SW 5, SW 10, SW 15, and
SW MAX.
Select SW to stop output.
"– – –"
[MUTING]
To mute the volume.
[TONE]
To adjust the bass and treble.
[BALANCE]
To adjust the front speaker balance.
[LEVEL]
Use when adjusting speaker level.
[EFFECT]
Use when adjusting Dolby Pro Logic
2 or SFC effects.
[–/L, +/R]
First select SLEEP, EFFECT, LEVEL,
TONE or BALANCE, then press [–/L]
or [+/R] to adjust.