Setting Multi-Channel Tv Sound Mode; Setting The Night Mode; Setting The Dimmer - Marantz ES7001 User Manual

SETTINGS
SETTING MULTI-CHANNEL
TV SOUND MODE
• When the unit receives a high-definition
broadcast (AAC signal), the AAC indicator
lights in yellow.
In this case, you can select the output sound
from the TV by pressing the BILINGUAL
button on the remote controller.
• Each press of the button changes the
sound as follows:
Main Sub
Main + Sub
channel channel
BILINGUAL
button
Lights
20
¶
When "Main channel" is selected
¶
When "Sub channel" is selected
¶
When "Main+Sub" is selected
Note:
Some broadcasts may not feature multi-
channel audio (AAC signal).

SETTING THE NIGHT MODE

This mode is convenient for enjoying a movie,
etc. at night. You can enjoy the playback sound
without elevating the entire volume as only the
enhanced parts of the sound are suppressed
in this mode. Press the NIGHT MODE button
on the remote controller to activate this mode.
The NIGHT MODE indicator lights in green
on the unit.
The night mode is only available when the
Dolby Digital indicator is lit in blue.
Note:
Since the night mode effect is set by the
Dolby digital software, the desired effect
may not be achieved with software that
does not support the Dolby digital signal.
This mode cannot be used when a dts,
AAC or PCM signal is input.
NIGHT MODE
button
Lights

SETTING THE DIMMER

Press the DIMMER button on the remote
controller to dim the display window of the
unit. To cancel the dimmer mode, press the
button again.
DIMMER
button