U.S. Responsible Party: Marantz America, Inc. 11. Only use attachments/accessories specifi ed by the manufacturer. or table specified by the manufacturer, or sold with the apparatus.
Thank you for purchasing the Marantz Home Theater System. Before using this unit, please read the User Guide carefully to ensure proper operation of the unit, and retain it together with the supplied warranty. Accessories Check Before use, check the below accessories were included in the package.
OPSODIS technology has been united with Marantz’s high-quality sound technology to realize a superior surround environment than ever before. The ES7001 realizes reproduction of omni-directional sound only with the speakers built in this unit. The ES7001 releases listeners from the conventional surround environment that has required complex installation of five or more speakers.
Equipment mains working setting Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. This unit can be powered by 120V AC only.
Page 6
BEFORE USING ¶ Cautions on handling batteries For use of Remote controller ¶ Misuse of the batteries can result in electrolyte Loading batteries leakage, rupturing, corrosion, etc. Before using the remote controller for the first Bear in mind the following points when using time, load the batteries in the remote controller.
Note: Keeping this button pressed increases the Before installing this unit, connect a volume successively. commercially available or optional Marantz subwoofer with a built-in amplifier. r VOLUME – button y NIGHT MODE indicator Press this button to decrease the volume.
REMOTE OUT jack This jack is used to connect other Marantz equipment such as a DVD player equipped with remote control jack. Note: When the Marantz DVD player or the...
Press this button to dim the display window. ⁄1 SUBWOOFER button This button is used to activate a commercially available or the Marantz SW7001 subwoofer with a built-in amplifier connected to the unit. Note: This function is activated at the factory.
Page 10
Preset code setting The remote control codes of TVs of manufacturers other than Marantz are preset in the supplied remote controller. To use the supplied remote controller for the TV of another manufacturer, enter the code in the remote controller.
Page 12
• For details on operation, please refer to the instruction manual supplied with the connected Marantz products. • Some models may not operate with the remote controller supplied with this unit. Buttons used for a Marantz DVD player DVD POWER button button ∞ button...
Page 13
NAMES AND FUNCTIONS OF PARTS Buttons used for the Marantz IS201 iPod universal dock AUX POWER button button ∞ button button MENU button REPEAT button MODE button SHUFFLE button button button button button button ¡ button ¢ button Turns on the power of an iPod connected to the IS201 or sets it to standby mode.
OPT digital audio output Connections connector on the unit. The Marantz DVD player is assigned to the d1 button on the supplied remote controller, and the basic operations of the Marantz DVD player are enabled with the remote controller.
CONNECTIONS CONNECTING ANALOG EQUIPMENT • This unit is equipped with two analog inputs. • Use a commercially available RCA audio cable for connection. Connections • Connect a VCR to the ANALOG IN 1 connector on the unit. A VCR is assigned to the A1 (VIDEO) button on the supplied remote controller. •...
• The REMOTE OUT jack is used for connection with the Marantz DVD player, etc. equipped with remote control output. • When the Marantz DVD player or the IS201 is located in a place where the infrared beam cannot be easily received, make a remote control connection. When you operate the remote controller pointing toward this unit, a received command signal is transmitted to the connected equipment.
Installing the unit • Install the unit so that the center of the seat is aligned with the center of the unit. ES7001 ES7001 • When mounting the unit in a rack, align the front surface of the rack with the front of the unit.
BASIC OPERATIONS TURNING ON THE UNIT Turn on the power of the audio equipment connected to this unit. Set the input selector The procedure for operating the unit for on the audio equipment to this unit. playback with a DVD player is described below Connect the AC power cord to the wall as a representative example.
Mounted in the RM7001 rack SEAT button Installed in a higher place than the TV button ¶ When audience is one person ES7001 ¶ When audience is two or more persons ES7001 ES7001 Note: When there is a large audience, try both settings and select the setting which gives a better stereophonic effect.
SETTINGS ¶ SETTING THE VIEWING/ LISTENING DISTANCE • This item is used to set the distance between the unit and audience. • Hold down the SEAT button on the remote controller for over two seconds to change ¶ the setting. Each time you hold down the button for over two seconds while the viewing/listening distance indication is displayed in the...
SETTINGS SETTING THE BINAURAL SETTING THE DOLBY MODE PRO LOGIC • Press the MODE button on the remote • This item is used to select the sound field controller to listen to the audio source environment produced by Dolby Pro Logic recorded in binaural mode.
SETTINGS ¶ SETTING MULTI-CHANNEL TV SOUND MODE • When the unit receives a high-definition broadcast (AAC signal), the AAC indicator lights in yellow. ¶ In this case, you can select the output sound from the TV by pressing the BILINGUAL button on the remote controller.
To reset all the items that have been set to the If the trouble is not fixed after making the following checks, contact the place of purchase, your nearest Marantz dealer, our customer service factory preset settings (initial settings), hold center, or our repair service center.
Specifications subject to change without prior notice. OTHERS The section descr ibes the care and Input maintenance tasks that must be performed to optimize the operation of your Marantz component. Output Cleaning of equipment external surfaces The exterior finish of your unit will last...
Page 25
You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in Japan 07/2007 00M20AJ851250 mzh-g...
Need help?
Do you have a question about the ES7001 and is the answer not in the manual?
Questions and answers