The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims...
Page 2
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. - When the DVI-SPLITPRO-2X is switched off, 5-10 seconds is required to re-power the device again, this allows the power capacitors to discharge and prevents any accidental damage to main board.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page 2...
INTRODUCTION The DVI-SPLITPRO-2X Advanced Dual Screen Multiviewer with IR Remote Control is an advanced video processor for most multimedia presentations. This unit is an ideal solution for applications where two video signals must be displayed on a single display. It supports multiple types of video inputs, of which two can be outputted simultaneously with the desired display layout through software control.
PACKAGE CONTENTS Before you start the installation of the converter, please check the package contents. DVI-SPLITPRO-2X RACK MOUNTING KIT IR REMOTE CONTROL SOFTWARE CD AC POWER SUPPLY USER MANUAL www.avenview.com Page 4...
• Do not twist or pull by force ends of the video cable. It can cause malfunction. PANEL DESCRIPTION Avenview Advanced Dual Screen Video processor (DVI-SPLITPRO-2X) has 2 inputs and accepts both graphics and video signals, which come from any source through (HDMI/DVI) and display it simultaneously on the same screen.
Output: DVI output 2 Output: DVI output 1 USB 5V The DVI input and output on the DVI-SPLITPRO-2X is also compatible with HDMI. please see the example of the cable above to use. Note: Cable not included with packaging contents DVI to HDMI www.avenview.com...
IR REMOTE CONTROL Avenview DVI-SPLITPRO-2X, Advanced Dual Screen processor ships with a compact IR Remote Control that allows for direct access to most commands used to control the video processor. IR REMOTE BUTTON DEFINE 1. F1 Reserved 2. F2 Reserved 3.
SOFTWARE CONTROL 5.1 Software Installation 1. The DVI-SPLITPRO-2X provides a software control program which runs under Microsoft Windows 98, 2000, Xp, Vista, 7 through the interface of RS-232 serial control. 2. Before you click on the icon of the software, make sure you have secured the connection between your computer COM port and the DVI-SPLITPRO-2X.
Window 1 in full screen Window 2 in full screen In addition, you can change the output layout by clicking the mouse left button. It has four different layouts (Dual Horizontal Output, Dual Vertical Output, Single Output 1, and Single Output 2). www.avenview.com Page 10...
Page 14
Port Setting: Pop‐up the “Port Setting” dialog, user can change the connecting way. Advance Setting: In this function, user can set the no signal color, fade in/ out effect, background picture, window text, input text, OSD border, rotation, EDID and factory reset. www.avenview.com Page 11...
Page 15
Rotation: For Rotation function, only window 1 can be applied. EDID: User can learn EDID from default or display. In addition, it also provides advance EDID function for user to edit, save and read. www.avenview.com Page 12...
Page 16
Factory Reset: Click the button to do factory default reset. This default reset process will take about 10~15 seconds and it will be initialized all setting to original system state. www.avenview.com Page 13...
Page 17
Chroma Key: It can turn on/off the Chroma key function and adjust the parameters of Chroma key. Crop function: This function is used to crop or clip an image. www.avenview.com Page 14...
Page 18
The setup diagram is shown as below. Pixel Enable: Allow user to adjust video layout size by pixels. The video crop by pixel and percent are almost same. The differences come from the adjustment ratio. Version: Read the software and firmware version. www.avenview.com Page 15...
Page 19
Default layout: Use factory preloaded video layouts. Custom layout: Use custom pre‐saved video layouts In this part, you can adjust the size and position of output screen. If you want to save the layout, please click the right button of mouse to save this layout into device. www.avenview.com Page 16...
Page 20
5. Window selection and input mapping For each display window, user can assign arbitrary video input here. 6. Window setting In here, you can adjust the size, position or other settings of the specified window. www.avenview.com Page 17...
10.3" x 7.6" x 1.7" (L x W x H) DIMENSIONS WEIGHT 6.4 lbs SIZE 1u Rack-mount with ears POWER SUPPLY AC 100-240V POWER CONSUMPTION 5.75 Watts (max) OPERATING TEMPERATURE 0~40°C [32~104°f ] STORAGE TEMPERATURE -20~60°C [-4~140°f ] RELATIVE HUMIDITY 20~90% RH [no condensation] www.avenview.com Page 18...
Page 23
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the DVI-SPLITPRO-2X and is the answer not in the manual?
Questions and answers