The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular
purpose, or infringement of any intellectual property right. Reproduction of this manual, or parts thereof, in any form, without the express written
permission of Avenview Inc. is strictly prohibited.
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
However, like all electronic equipment’s, the SDI-SPLITPRO-4S should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page|4...
INTRODUCTION The SDI-SPLITPRO-4S Advanced is an advanced video processor 3G/HD/SD-SDI Quad-view Video Processor for multimedia presentations and ideal for surveillance applications. This unit is an ideal solution for applications where four video signals must be displayed on a single display. It supports up to 4 SDI video inputs, which can be outputted simultaneously with the desired display layout through software control.
PACKAGE CONTENTS Before you start the installation of the converter, please check the package contents. SDI-SPLITPRO-4S Rack Mounting Kit 1U rack mounting ear RS232 to USB Adapter Software CD 12V Power Brick AC Power Cord User’s Manual BEFORE INSTALLATION ...
PANEL DESCRIPTION Avenview Quad Screen Video Processor (SDI-SPLITPRO-4S) has 4 inputs, 2 Main outputs, 4 SDI Local Loop out to local monitors as well as DVI output accepts both graphics and video signals, which come from SDI, composite video sources respectively.
SDI-SPLITPRO-4S I/O CONNECTORS CONNECTORS VIDEO SOURCE INPUT CVBS Display DUAL 1 x DVI/HDMI Display [165MHz OUTPUT SDI/DVI-D OUT 2 x SDI 4 x SDI LOCAL LOOP with Re-Clocking www.avenview.com Page|8...
2. Switch off SDI-SPLITPRO-4S and all source devices and displays that will be connected 3. Connect a monitor, projector and any HD displays that come with DVI / HDMI inputs by using 1 male – male DVI cable to SDI-SPLITPRO-4S DVI output. (you can connect 2 displays equipped with DVI and SDI.
SOFTWARE SETUP GUIDE Power up the SDI-SPLITPRO-4S and you can see VFD on the front panel blink. . Launch Avenview Control Software. It will open following “Serial Port” setting page. Click on Scan button and it will automatically detect Avenview Video Processor and display the following screen: Note the “Device –...
Page 11
Once Device is Ready, click “OK” and Avenview Control Software will launch www.avenview.com Page|11...
Page 12
Lock Aspect Ratio- Fix the size ratio when the window is resizing PAP Mode Control/Input Selection Main Window: The user can set the visible, position, size, polarity and default layout. Input Selection: Set the window to what input. Mode”. Window Polarity: Set the main window layer polarity in “PAP www.avenview.com Page|12...
Page 13
THE “MAIN WINDOW” WILL BE THE LARGEST SIZE IN THE ICON 4. Custom Layout- The user can create their own layout and design of by selecting the EIGHT (8) Custom Layout Tabs ………………. . These layouts can be save by selecting the SAVE ICON in the Toolbar List www.avenview.com Page|13...
SPECIFICATIONS MODEL SDI-SPLITPRO-4S DESCRIPTION Advanced Quad Screen Video Processor with Front Panel and IR Control DUAL OUTPUT SUPPORT Yes [DVI & SDI] BACKGROUND VIDEO INPUT HDCP COMPLIANCE DVI/HDMI[165MHz] VIDEO BANDWIDTH SDI 3G/HD/SD SUPPORTED RESOLUTIONS 480i / 576i/ 720p / 1080i / 1080p...
GENERAL TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION Ensure that SDI-SPLITPRO-4S is plugged in If you are recovering from power outage, accidentally unplug the adapter or NO POWER other power surge conditions, leave the device off for an at least a minute and then power it on again.
Page 16
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview...
Need help?
Do you have a question about the SDI-SPLITPRO-4S and is the answer not in the manual?
Questions and answers