Rd-3108C/3208C/4019A/4029A - RD -3108C Service Manual

(RD-3108C/3208C/4019A/4029A)

Unit test
Key LCD display
1 Clamp A Position test
2 Clamp B Position test
3 Clamp C Position test
4 Scan clutch test
5 Feed electromagnet test Engage the Feed electromagnet
6 Space motor test
7 Ink pump motor test
8 Scan motor test
9 Print motor test
Clear Cutter motor test
All clear Plating clutch test
Speed + Drum test
Speed - Indicator light
Space + Unload motor test
Space - Main motor test
Check the sensor as below (Note :the sensor is blocked-1, the sensor is unblocked-0).
0 Sensor group 1
1 Cutter jog switch
2 Feed tray switch
3 Right cutter position switch
4 Left cutter position switch
5 Paper detect switch
6 Original ready sensor (RD-3108C)
7 (A)Original detect sensor (RD-3108C)
(B)Scan cover open/close switch (RD-4019A)
8 N/A
Test print Sensor group 3
1 Ink detect sensor
2 Space shift sensor
3 Space home position sensor
4 Master detect sensor
5 Drum jog switch
6 Drum detect switch
7 Front cover switch
8 Master feed covers switch( not available with RD4019A and 4029A)
Functions and Notes
To drive the clamp motor, and the clamp is switched to A position
To drive the clamp motor, and the clamp is switched to B position
To drive the clamp motor, and the clamp is switched to C position
Engage the scan clutch (RD-3108C only)
Drive the space motor
Drive the ink motor, automatically stops when the ink is full
Drive the scan motor and scan clutch (RD-3108C)
Drive the print motor and plating clutch
Complete the cutting process (Attention about the danger of cutter)
Engage plating clutch
Drive the drum : unload(eject), load(feed) position and stop position
All lights off / on
Drive the unload motor
Drive the main motor (From low speed to high speed)
Master-making Sensor group 2
1 Middle paper jam sensor
2 Clamper drive position sensor
3 Drum stop(home) position sensor
4 Clamp B mode sensor
5 Clamp A/C mode sensor
6 Disposal box full switch
7 Master eject sensor
8 Right paper jam sensor
- 27-