Paper Receiving Unit - RD -3108C Service Manual

7. Paper Delivery Unit
37) Paper delivery guide
38) Paper receiving guide
39) Paper stop
40) Print pressure adjust knob
41) Drum jog switch
42) Paper delivery belt
43) Air knife/blower
44) Air pipe
45) Receive guide
46) Air knife
47) Delivery belt
Adjustment:
1. Clearance between drum and separate pawl
a. 0pen the paper switch mechanic device and upward K board.
b. Open the master eject box and check clearance
between drum surface and separate pawl.
Standard: B4 size: about 1mm~1.5mm
A3 size: about 2mm~2.5mm
c. If not standard: loosen the screw .
d. Shift the position(up/down), meanwhile check the
clearance until it's normal, then fix the screw.
B4 size
A3 size
- 24-