WatchStar APOLLO AUTOMATON Instruction Booklet page 23

A007WS caliber ("Automaton")
SETTING THE TIME
1. HOUR HAND: Pull the crown (C-) then push it back to the normal position (C)� The
hour hand (H) will jump, indicating that it is now ready to be set�
a� Press and hold the crown (C+) to move the hour hand forward continuously�
Release the crown to stop moving the hand�
b� Press the crown briefly (C+) to step the time forward by one hour.
2� MINUTE HAND: Pull the crown (C-) then push it back to the normal position (C)� The
minute hand (M) will jump, indicating that it is now ready to be set�
a� Press and hold the crown (C+) to move the hour hand forward continuously�
Release the crown to stop moving the hand�
b� Press the crown briefly (C+) to step the time forward by one minute.
3� If you need to make additional adjustments to the hour and minute hands, repeat
steps 1 and 2 as necessary�
4� To exit time-setting mode, release the crown to the normal position (C)� After 10
seconds the watch returns to normal timekeeping mode�
Note: Do not over-push or use extreme pressure on the crown as it may damage the
movement or crown stem. Also when pushing please do not press at an angle as it may
break the crown stem.
43
Instructions and Specifications A007WS caliber ("Automaton")
ACTIVATION MODE
Press the crown (C+) for one second� Do not hold down on the crown. The hour hand
(H) and minute hand (M) will move to the 12:00 position� The subdial hands (S1, S2, S3)
will activate in a programmed movement for 10 seconds. Once the program has finished,
the hour and minute hands will return to the correct designated time�
Note: Activation Mode is designed to automatically activate at the top of each hour. The
10 seconds of movement is calculated in the program so the correct time should be
displayed appropriately and no loss of time should occur.
Hour Hand (H)
Subdial Hand (S1)
Subdial Hand (S2)
Instructions and Specifications
Pull (C-)
Normal crown position (C)
Push (C+)
Minute Hand (M)
Subdial Hand (S3)
44