WatchStar APOLLO AUTOMATON Instruction Booklet page 17

90S5 caliber
SETTING THE TIME
1� Pull the crown out to the 1st position�
2� Turn the crown to set hour and minute hands�
3� After the time has been set, push the crown back to the Normal position�
WINDING THE MAINSPRING
Automatic winding watch can also be wound by turning the crown in the Normal position�
Wind 15 - 20 times clockwise until seconds hand starts to move naturally�
Hour hand
Seconds hand
31
Instructions and Specifications
Normal crown
Minute hand
position
Crown 1st
position
Front view
skeleton
90S5 caliber
Ligne 11-1/2'''
Diameter ø26�00mm
Total Thickness 3�90mm
Hands 3 (H/M/S)
Jewels 24
Vibration Frequency 28,800 per hour
Accuracy -10~30 seconds/day
Running Time More than 42 hours
Winding Automatic and hand winding� The mainspring becomes
fully wound by rotating the ratchet wheel 7�5 times (turn-
ing the crown 40 times)�
Automatic Winding Winding direction:
Structure Clockwise (looking from caseback side)
Additional Features Front view skeleton
Shock-absorber device for balance staff
Stop second device
Instructions and Specifications
32