Connections - Marantz SA-7S1 User Manual

CONNECTIONS

Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection
please refer to instruction manuals of stereo system to be connected.
Caution: Do not connect output from this unit to PHONO input of your audio system.
1. Connect the audio cable q to this unit's front speaker outputs and the stereo inputs on your amplifier, receiver or stereo system.
2. Connect the optical cable w, coaxial cable e to the digital input on your AV amplifier, D/A converter, CD-R, etc..
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played. No signal is output
when playing a Super Audio CD.
3. When connecting to an external master clock generator, use the BNC terminal coaxial cable (75Ω) r.
* Signals are output from the DIGITAL OUTPUTS connector (OPT., COAX.) only when an audio CD is being played. No signal is
output when playing a super audio CD.
connection cord
Audio cable q
(Supplied)
To audio input
terminals on amplifier
INPUT
SELECTOR
To Analog Audio output
(red) (white)
Balanced
(Optional)
s te r eo c on tr ol a mp li f ie r s c - 7 s2
BALANCED
CD
A SYNC B
LINE 1
p ower on /o ff
LINE 2
RECORDER
in put s e le ct or
Left Right
speaker speaker
To Digital Audio
output
r
To balanced
BNC terminal
input
coaxial cable
terminals on
(75Ω)
amplifier
DISPLAY ATT
v ol ume
w
Optical cable
(Optional)
e
Coaxial cable
(Optional)
Connect to digital input
terminals of receiver, D/A
converter or CD recorder,
etc..
Connect to master clock
generator
11