Huawei E5186 Quick Start Manual page 9

Note:
• The device supports USB 1.1 and 2.0 storage devices in FAT16, FAT32,
ext2, and ext3 formats. Storage devices with power supply requirements
exceeding USB standards may not work properly. It is recommended that you
prepare an external power supply in these cases. The device is compatible
with samba-supported USB printers.
• This port cannot be connected to USB host devices, such as computers.
13 – TELEPHONE PORTS (RJ11)
• This functionality is not currently available.
14 – LAN PORTS (RJ45)
• Lets you connect your modem to computers,
switches, or other network devices.
15 – LAN4/WAN PORT (RJ45)
• Connect to computer, switch, or other network
device. WAN functionality is not currently
available.
16 – LAN4/WAN INDICATOR
• On: The port is connected to a device.
• Blinking: Data is being transmitted through the
port.
• Off: No device is connected to the port.
17 – LAN INDICATORS
• On: The port is connected to a device.
• Blinking: Data is being transmitted through the
port.
• Off: No device is connected to the port.
18 – EXTERNAL ANTENNA PORTS (SMA TYPE)
• Connect to external antennas (optional).
Note: Before you connect an external antenna to the device, remove the
device's rear cover.