Table of Contents
Advertisement
Security Checks
All keypads have LEDs to clearly indicate
what is happening.
Alert
Alarm
Tamper
Fault
Unset
The 'Alert' (orange) LED will flash if there
is information to display for you. Enter
your code to see the information. After a
code
has
been
entered,
one
of
the
following lamps will light: Alarm, tamper or
fault. The relevant detail of the problem
will be shown on the display. To clear the
display, press the 'Yes' key (or the display
will clear automatically after 3 minutes.)
The 'Alarm' (red) LED will flash after code
entry if an alarm occurs.
The 'Tamper' (red) LED will flash after
code entry if the wiring or equipment is
tampered with.
The 'Fault' (orange) LED will light after
code entry to indicate if a technical fault
occurs.
The 'Unset' (green) LED will light for 5
seconds after unsetting any part of the
system. It will also light during the setting
procedure, going off once set.
Page 4
Hide quick links:
Advertisement
Table of Contents
