Pin Atx Power; Eps 8 Pin 12V Power - EVGA Z170 STINGER User Manual

EVGA Z170 STINGER (111-SS-E172)
24-pin ATX Power (ATX_PWR_24P)
is the main power supply connector located along the lower
ATX_PWR_24p
right edge of the board. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power
supply cable into the connector and make sure it is secure.
The 24pin Power Connector may be standard or right angled depending on
your motherboard model.
EPS 8-pin 12V Power (PWR )
8P1
, the 8-pin ATX 12V power connections, is used to provide
EPS PWR 8P1
power to the CPU. Align the pins to the connector and press firmly until seated.
The secondary is optional for improved overclocking. Please remember to
make sure that the tab on the EPS socket is aligned with the release clip on the
cable, because if they are on opposite sides, while it will be able to fit, it is the
incorrect cable and WILL damage the board if powered on, as that is a PCI-E
8pin cable.
- 20 -