Disassembly Of Track & Suspension - Polaris Playmate 1971 Shop Manual

6- 1. Disassembly of Track & Suspension
1. Loosen track adjusting bolts. See Figure 6- 1.
2. Remove driftskipper or slide rail by tilting
machine on its side, then remove two cap
screws, follow the same procedure for the two
cap screws on opposite side of machine. See
figure 6- 1.
3. Remove drive shaft and track. Refer to Num-
bers 1,2,3,4 on page 46 and 7,8,9 on page 47.
4. Assemble machine in the reverse order of dis-
assembly. Use care in assembling all parts, to
insure proper track tension, track alignment.
Figure 6 · 1
49