The Perfect Fit; Suspension Adjustments - Polaris 2015 600 RMK Owner's Manual

THE PERFECT FIT

Suspension Adjustments

Factory settings, combined with user adjustments to the rear track shock
spring (RTSS), should be all that's necessary to provide the best riding
experience for most riders. The primary adjustment for overall vehicle
balance is RTSS preload. Perform this adjustment first.
Always perform shock spring preload adjustments with the weight of
the vehicle removed from the shock and with the shock at full extension.
NOTICE: Never adjust spring preload to an installed length longer than the
maximum or shorter than the minimum lengths in the following chart.
Damage to the suspension could result. Never exceed one inch (2.54
cm) of preload beyond the factory settings. When decreasing preload,
make sure at least two turns of preload are holding the retainer
against the spring.
Spring Type
RMK Factory Spring
PRO-RMK Factory Spring
ASSAULT RMK Factory Spring
250# Optional Heavy Spring
Installed Length
Measurement
50
Maximum
Installed Length
10 3/4" (27.3 cm)
11" (28 cm)
11"(28 cm)
10 7/8" (27.6 cm)
Minimum Installed
Length
9 5/8" (24.5 cm)
9 3/4" (24.8 cm)
9 3/8" (23.8 cm)
9 7/8" (25 cm)