Using The Scanner; Led Indicator; Scanner Beep; Scan Map - Champ Dolphin SD500 User Manual

3.

USING THE SCANNER

1. Connect the scanner to the host system by the
Interface cable.
2. Aim the sensor on the target barcode to read.
The scanner gives feedback to users in
3.
two ways: the Green color LED
Indicator and the Scanner Beep.
LED INDICATOR：The LED indicator on top of
the scanner is used to provide user with
feedback.
Condition
Connect to the host
successfully
Scanned successfully
Power off
SCANNER BEEP：The scanner buzzes to
provide user with feedback while using the
scanner.
Condition
Connect to the host
successfully
Scanned successfully
No barcode detected
4. Scan barcode at a distance not beyond 80mm.
SCAN MAP：
Green color LED
Three short flashes,
twice.
One flash
Off
Buzzer
Three short beeps,
twice
One short beep
high tone
No beep
7