Page 1
2. Insert the system CD that come with the barcode scanner into the CD-Rom drive of your computer and start the setup program. 3. Insert the CHAMP CF or SDIO Barcode Laser Scanner into the Pocket PC Compact Flash or SDIO Slot.
Page 2
“ it list on bottom of your PDAs . Click “ Exit “ to close Champ Barcode Keyboard Emulator program. 7. It needs to run the Champ Barcode Keyboard Emulator program again after the Pocket PC is powered off. K:\Products\Packing\BC\BC-PL788-CF,SD\ChampBarcodeScannerQuickStartGuide.doc...
Page 3
8. Assign a Trigger button on your Pocket PC 8.1 [Start] [Settings] [Buttons] 8.2 From the Button List, select a Pocket PC button to trigger WHANTO Barcode Reader. In the Button Assignment field, select Barcode KeyBoard Emulator. When done, tap ok. 8.3 After the Pocket PC is powered off and power on again, you can press the Trigger Button to restart the Keyboard Emulator program, then scan the barcode.