Download Print this page
Toa WT-3810 Operating Instructions

Toa WT-3810 Operating Instructions

Wireless tuner
Hide thumbs Also See for WT-3810:

Advertisement

Quick Links

WIRELESS TUNER
Please follow the instructions in this manual to
obtain the optimum results from this unit.
We also recommend that you keep this manual
handy for future reference.
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section
carefully before use.
• Make sure to observe the instructions in this
manual as the conventions of safety symbols and
messages regarded as very important precautions
are included.
• We also recommend you keep this instruction
manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are
used in this manual to prevent bodily injury and
property damage which could result from
mishandling. Before operating your product, read this
manual first and understand the safety symbols and
messages so you are thoroughly aware of the
potential safety hazards.
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
When Installing the Unit
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.

OPERATING INSTRUCTIONS

• Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down and causing personal injury and/or property
damage.
• To prevent lightning strikes, install the unit at least
five meters away from a lightning rod, and yet
within the protective range (angle of 45°) of the
lightning conductor. Lightning strikes may cause a
fire, electric shock or personal injury.
• Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
When the Unit is in Use
• Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
· If you detect smoke or a strange smell coming
from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)
• Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
• Do not touch the unit's antennas during thunder
and lightning, as this may result in electric shock.
WT-3810

Advertisement

loading
Need help?

Need help?

Do you have a question about the WT-3810 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toa WT-3810

  • Page 1: Operating Instructions

    AC outlet and Safety Symbol and Message Conventions contact your nearest TOA dealer. Make no further attempt to operate the unit in this condition as this Safety symbols and messages described below are may cause fire or electric shock.
  • Page 2 2. GENERAL DESCRIPTION The WT-3810 Wireless Tuner is designed for use on the VHF band, and suitable for vocal or speech reinforcement applications. It features a compander circuit which minimizes the influence of ambient noise. 3. FEATURES •...
  • Page 3 5. NOMENCLATURE AND FUNCTIONS [Front] 1. Antenna 4. Reception lamps Raise the two antennas at a 45° angle outwards Either lamp, A or B, lights yellow when the tuner from a vertical line. Do not raise the antennas receives a radio signal. when carrying the tuner.
  • Page 4 7. CHANNEL NUMBER SETTING Turn the Channel Select switch to select the same channel number as that of the wireless microphone. A total of 6 different channel numbers are made available for selection from 1 – 6. Front panel Channel select switch CHANNEL 8.