Store the Satellite Positions:
Move the actuator or H-H mount with the 3MANUAL4buttons to the proper position.
Press the Store key for 2 seconds: the LED will flash and show
"C--_ _" and "STORE" alternately.
Press number keys to choose the position you want to store (1-99), then press the OK
key to confirm the store operation.
4. Repeat steps 1 through 3 to set up as many satellite positions as you want.
Naming the satellite positions:
Sixty satellite names are already stored in the GBOX for your designation. Also, you
can give names (6-letter maximum) to your favorite satellite positions.
Choosing pre-stored names for satellite positions
1. Move the actuator or H-H mount with the
2. Press the name button for 2 seconds. The LED will flash the pre-stored
satellite name that is built into the GBOX.
3. Press the
4. Press OK key to confirm; the name you choose will flash three times, then the
assigned position will show the name.
____________________________________________________________________________
Imported and distributed by Sadoun Satellite Sales,
or
to choose the favorite name for satellite positions.
34
buttons to the right position.
www.sadoun.com
1-888-519-9595
Need help?
Do you have a question about the SatHawk GBOX V3000 and is the answer not in the manual?