Installing The Antenna; Installing The Belt Clip - RCA RD3500 Instruction Manual

Installing the Antenna

Screw the antenna into the connector on the
top of the transceiver by holding the antenna
at its base and turning it clock-wise until
secure.
Note: The antenna is neither a handle, a
key ring retainer, nor a speaker/microphone
attachment point. Using the antenna in these
ways may damage the antenna and degrade
your transceiver's performance.
Copyright © 2014 Discount Two-Way Radio Corporation - North American Distributor
RD3500 Professional Two-Way Radio Instruction Manual
TM

Installing the Belt Clip

If necessary, buckle the belt clip to the back of
the battery pack.
Note: if not install the belt clip, the installation
position may become hot during High
Temperature.
CAUTION: DO NOT USE GLUE WHICH IS
DESIGNED TO PREVENT SCREW LOOSENING
WHEN INSTALLING THE BELT CLIP,AS IT MAY
CAUSE DAMAGE TO THE TRANSCEIVER.
ACRYLIC ESTER, WHICH IS CONTAINED
IN THESE GLUES,
TRANSCEIVER'S BACK PANEL.
MAY CRACK THE
9