Table of Contents
Advertisement
WINDOWS XP / 2003
Once you have installed the NewerTech MAXPower RAID mini-SAS 6G card and booted your PC, follow these
instructions to install the drivers and the RAID Management application.
Note: Windows XP is only supported on a PC and is not supported via Boot Camp on a Mac.
1. Download the latest installer file from
prefix: MAXPower_RAID_miniSAS6G Win_drivers .
2. Right-click the downloaded file and choose "Extract All".
3. Click the Windows Start menu, right-click on "Control Panel", then double-click "System" to open the System
screen.
4. Click on "Hardware" tab then click the "Device Manager" button.
5. Under the "Other Devices" category, the MAXPower RAID Card will appear with a yellow warning symbol.
6. Right click on the MAXPower RAID Card and select "Update Driver Software..." to start the driver installation.
7. Click on "Browse my computer for driver software".
8. Browse to the "maxpowerraidminisas6gwindrivers" folder, open it and then open the subfolder named "Drivers".
9. Find the folder with your operating system's name, open it and then click "Next".
10. When asked "Would you like to install this driver software?", click "Install".
11. Once the installation is complete, click the option to restart your computer.
RAID MANAGER INSTALLATION STEPS
1. From the unzipped folder noted in step 7 above. Browse to the sub-folder called "Web Manager".
2. Run the Setup file.
3. Once the setup is complete restart your computer.
Page 6
NewerTech MAXPower RAID mini-SAS 6G
www.newertech.com/support/
. The correct .zip file is named with the
Advertisement
Table of Contents
