Settings - NewerTech MAXPower mini-SAS 6G-2e User Manual

Settings

General configuration settings for the NewerTech MAXPower RAID mini-SAS 6G controller card can be set in
the Settings page by clicking on the "Setting" menu item.
Auto Rebuild
Enabling Auto Rebuild allows the controller to use any matching
unformatted drive for rebuilding a failed array regardless of
whether or not it is in the Spare Pool.
Continue Rebuilding on Error
Enabling this allows the controller to keep rebuilding the array as
much as possible even if there are read errors occurring on the
source drives.
Audible Alarm
Enables and disables the audible alarms for major events.
Disabled by default.
Rebuild Priority
Sets the rebuild priority grade with the higher the priority
providing the fastest rebuild times, but slowing down any access
that occurs during the rebuild.
Spindown Idle Disk
Sets the time in minutes for hard disk drives to spin down when
not being used.
SAF-TE
Configures SAF-TE settings for SAF-TE activated enclosures.
Listening Port
The controller card's listening port for access to the Web Manager
can be changed here. The listening port is specified at the end of
the URL (https://localhost:####) used to access the Web Manager.
Changing the listening port is beneficial when multiple cards use
the same listening port.
Password
The password used for accessing the Web Manager can be
changed here. It is strongly recommend to change the password
to something other than the default password. The default
username and password are "admin" and "admin" respectively.
SMTP Setting / Recipients / Add Recipient
Enter SMTP (outgoing) mail server setting here to allow
notifications and warnings to be sent to email recipients. You can
add multiple recipients and choose level of events that are sent
to each email recipient.
Page 12
NewerTech MAXPower RAID mini-SAS 6G