Panasonic CF-27 Series Toughbook Reference Manual page 9

Touchscreen
Configuring the Touchscreen
Double click settings
Set the width and height of
the double click.
Advanced configuration
Set the advanced settings.
When needed, the touchscreen can be configured using the following steps.
1
Select from the taskbar and then select [Touchscreen] or
select [Touchscreen] in [Start] - [Settings] - [Control Panel] -
[Mouse]
The following screen will appear.
NOTE
For more information, click
2
Make necessary changes
3
Click [OK]
NOTE
The double-click speed of the Touchscreen can be changed in [Tap and
Buttons]* in [Start] - [Settings] - [Control Panel] - [Mouse].
[Name:] in [General] can not be changed even when the touchscreen driver is
installed.
* [Buttons] is displayed, depending on the computer.
Test
Test for the "Double click settings".
Calibration & Test
Define the calibration setup. Use
this procedure when the cursor
and your (finger) touches do not
appear to agree. (Necessary for
changes in the alignment of the
touchscreen with visual images or
an adjustment of the display reso-
lution.).
Touch the "+" mark on the calibra-
tion screen for about one second.
After the calibration procedure is
executed (i.e., after the nine "+"
marks are touched), the proce-
dure ends when the
pressed.
at the upper right corner.
9
Enter is