Panasonic CF-27 Series Toughbook Reference Manual page 5

Touch Pad
(Advanced)
Basic Operation
Wheel
Indicates an operation applicable to the Microsoft
Original
Indicates an operation applicable to the original mode.
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll*
Scroll a document
(rotate the wheel)
Auto Scroll*
Automatically scroll a document
(move the mouse after clicking
the wheel)
Within the parentheses () are operations to follow when using an external Microsoft
IntelliMouse TM .
*
Indicates that the movements will differ depending on the application.
NOTE
When a check mark
After the drag operation (above : left side), it is necessary to determine the
destination (i.e., location of drop) by one tap. Under the condition no destination
is selected, do not use the suspend or hibernation function. Nothing is shown
on the display, even after resuming from the suspend or hibernation mode.
In this case, the display will return after a tap or click is made.
*
In [Start] - [Settings] - [Control Panel] - [Mouse] - [Tap and Buttons]
(Excluding CF-27EB6GDCM)
Touch Pad Operation
Wheel
Original
Wheel
Original
tapping
Wheel
Original
double-tapping
Wheel
Original
Two quick taps, but on
the second tap leaving
your finger down (ap-
plying pressure) and
moving it on the work
surface.
Wheel Wheel
Original
Wheel
1
Operate after pressing the two buttons simulta-
neously.
When releasing the auto scroll function:
One tap on the work surface.
is added for [use Drag Lock] *
® TM
IntelliMouse Wheel mode.
Move the tip of your finger
lightly over the surface.
or
clicking
or
double-clicking
or
While holding down
the button, moving
your finger on the work
surface.
Original
2
(To next page)
5
®