Wireless Display; Connect To A Network Printer; Use The Camera App; Use The Camera Viewfinder - Kogan Agora 4G Pro KHPHN4GOCA User Manual

Wireless display

Your phone can connect wirelessly to a Miracast-certified television or monitor that is
equipped with a certified Miracast adapter. You can show your phone's screen on the
connected device.
NOTE: For more information, see the documentation that comes with the Miracast-certified device you
wish to use with your phone.
1. Go to Settings > Device > Display > Cast screen.
2. Touch the switch to turn it to the On position:

Connect to a network printer

Go to Settings > System > Printing.
You can connect your phone wirelessly to a network printer that supports wireless
printing, and then print your phone content to the printer.
Before you can print, you need a printing service installed on your phone.
NOTE: For information on setting up a printer, see the documentation that comes with the printer you wish
to use with your phone.

Use the Camera app

Touch Camera.
NOTE: To open the camera from the lock screen, swipe the icon

Use the camera viewfinder

Capture a photo
1. Touch to switch between the front camera and the rear camera.
2. When using the rear camera, spread or pinch the viewfinder screen with two fingers
to zoom in or zoom out.
3. Aim the camera at the subject you wish to capture.
4. When the camera focuses on the subject in a selected focal point, touch
capture a photo.
NOTE: You can also press the Volume Up or Volume Down button
.
left.
(see page
30
to
8) to capture a photo.