AccuBANKER D580 User Manual page 13

3.0 Operation Cont.
3.3 Print Report
After detecting the notes, press "STA" key for 2 seconds, the "Print" message
will be displayed on the display and the report will be printed.
After finishing printing, the detector will return to scanning preparation condition.
If the serial number identification function is available, the serial number will be
printed at the same time.
Important: Printing data procedure doesn't delete the current counting record,
you must clearing the data before next scanning event.
3.4 Clearing Data
In order to avoid any confuse among two different banknotes lots, don't forget
clear the recorded data that belongs to the previous lot of bill already scanned.
For clearing the current data and start with the next scanning, press the "CUR"
key for 3 sec and a "Clear Data" message will be shown on the display.
Important: Before press the CUR key for delete the data, make sure the unit must
be in Reporting Mode.
.
13