Tobii Pro X3-120 Installation Manual

Safety and Compliance
Tobii Pro X3-120
1 Safety
1.1 Mounting Warning
The Tobii Pro X3-120 should be mounted according to
MANUFACTURER instructions of approved mounts. Tobii
AB or its agents are not liable for damage or injuries to a
person or their properties due to a Tobii Pro X3-120
falling from a mounted configuration. The mounting of a
Tobii Pro X3-120 is done entirely at the user's own risk.
The double sided tape supplied with the adhesive
Magnetic Mountin g Plates is designed to permanently
attach the bracket to the monitor/laptop. Attempting to
remove the bracket after attaching it using the supplied
tape can result in damage both to the monitor/laptop and
the bracket.
Do not lick the tape or place any part of the tape or
Magnetic Mounting Plate in one's mouth.
Do not mount the Tobii Pro X3-120 on monitors
positioned above the head or face of a user unless using
a dedicated "fixed mounting" solution.
1.2 Epilepsy Warning
Some people with Photosensitive Epilepsy are
susceptible to epileptic seizures or loss of consciousness
when exposed to certain flashing lights or light patterns in
everyday life. This may happen even if the person has no
medical history of epilepsy or has never had any epileptic
seizures.
A person with Photosensitive Epilepsy would also be
likely to have problems with TV screens, some arcade
games, and flickering fluorescent bulbs. Such people may
have a seizure while watching certain images or patterns
on a monitor, or even when exposed to the light sources
of an eye tracker. It is estimated that about 3-5% of
people with epilepsy have this type of Photosensitive
Epilepsy. Many people with Photosensitive Epilepsy
experience an "aura" or feel odd sensations before the
seizure occurs. If you feel odd during use, move your eyes
away from the eye tracker.
www.tobiipro.com
1.3 Infrared Warning
When activated, the Tobii Pro X3-120 emits pulsed
infrared (IR) light. Certain medical devices are susceptible
to disturbance by IR light and/or radiation. Do not use the
Tobii Pro X3-120 when in the vicinity of such susceptible of the FCC Rules. These limits are designed to provide
medical devices as their accuracy or proper functionality reasonable protection against harmful interference in a
could be inhibited. residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
1.4 Magnetic Field Warning
installed and used in accordance with the instructions,
The Tobii Pro X3-120 Magnetic Mounting contains may cause harmful interference to radio communications.
magnets. Magnetic fields may interfere with the function However, there is no guarantee that interference will not
of cardiac pacemakers and implantable cardioverter- occur in a particular installation. If this equipment does
defibrillators. As a general rule, maintain a minimum cause harmful interference to radio or television reception,
distance of 6 inches (15 centimeters) between any item which can be determined by turning the equipment off
with magnets and your heart device. and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.5 Child Safety
The Tobii Pro X3-120 is an advanced computer system
and electronic device. As such it is composed of
numerous separate, assembled parts. In the hands of a
child certain parts have the possibility of being separated
from the device, possibly constituting a choking hazard or
other danger to the child. Young children should not have
access to, or the use of, the device without parental or
guardian supervision.
1.6 Do not Open the Tobii Pro X3-120 2.2 Industry Canada Statement
Non-compliance will result in loss of Warranty! There are This Class B digital apparatus complies with Canadian
no user serviceable components inside. Contact Tobii Pro ICES-003.
Support if your Tobii Pro X3-120 is not working properly. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
2 Compliance Information
2.3 CE Statement
All Tobii Pro X3-120 are CE-marked, indicating
compliance with the essential health and safety The Tobii Pro X3-120 complies with the following
requirements set out in European Directives. Directives:
2.1 FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired 2.4 Standards
operation. The Tobii Pro X3-120 complies with the following
standards:
Modifications not expressly approved by Tobii AB could
void the user's authority to operate the equipment under
FCC rules.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
Emission standard for residential, commercial and
light industry environments
• EN 55024:1998+A1+A2, Information technology
equipment. Immunity characteristics. Limits and
methods of measurement
• IEC 60950–1:2005, Safety of information
technology equipment
• FCC part 15, Class B
3 Customer Support
All customer support is handled online at:
http://www.tobii.com/analysissupport
4 Disposing of the Tobii Pro X3-120
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and Do not dispose of the Tobii Pro X3-120 in general
receiver. household or office waste. Follow your local regulations
• Connect the equipment into a wall outlet on a circuit for the disposal of electrical and electronic equipment.
different from that to which the receiver is
Safety compliance in other languages
connected.
• Consult the dealer or experienced radio/TV Tobii Pro X3-120 safety and compliance information is
technician for assistance. available online in more languages.
Sicherheit und Zertifizierungen
Sikkerhed og Standarder
Sikkerhet og samsvar
Säkerhet och överensstämmelse
Seguridad y Conformidad
Turvallisuus-ja vaatimustenmukaisuusasiakirjat
Sécurité et conformité
Sicurezza e conformità
Veiligheid en conformiteit
Segurança e conformidade
• 2011/65/EU (RoHS 2) - Restriction of Hazardous
Substances Directive
• 2004/108/EC (EMC) - Electromagnetic
Compatibility Directive
• IEC/EN 62471:2008, Photo Biological Safety of
Lamps and Lamp Systems
• EMC Emission: EN 61000-6-3:2007, Generic
Emission standard for residential, commercial and
light industry environments
• EMC Immunity: EN 61000-6-1:2007, Generic
pro/
X3-120
Installation Guide