Advertisement
Quick Links
Kit Contents:
Water Trough
.625 Hole Plug, White
10-32 x 3/4 Phil Fat Type F Screw (2)
10-24 x 1/2 Trim HWH TY23 (2)
Trough Protector (2)
Water Curtain (2)
Ice Deflector Weldment
Water Fitting Bracket
Control Board
Installation Instructions
Bushing
Remove:
1. Splash shield (reuse)
2. Water inlet fitting and bracket (reuse fitting - discard bracket)
3. Water pump (reuse)
4. Water curtains (discard)
5. Trough protectors (discard)
6. Water level probe (reuse)
7. Water trough (discard)
8. Ice deflector (discard)
9. Control board (discard)
Before you install:
1. Remove four screws from the water pump mounting bracket. Remove three screws connecting the water pump
housing to the pump motor. Rotate the pump housing clockwise (from the shaft end) one position and then
reinstall the screws and mounting bracket (see Figure 3).
2. Remove the water inlet fitting from the water inlet bracket. Save two of the three plastic wing nuts and water inlet
fitting. These will be reused. Discard the bracket.
Install in the following order:
1.
New ice deflector
2.
New water trough
3.
Water pump and reroute water pump supply hose and dump to right side of pump (see Figures 1 and 3)
4.
Plug for water level probe and old mounting screw to cover holes - Note! Do not install probe at this time
5.
New water curtains
6.
New water inlet/water level probe mounting bracket, using screws provided (see Figure 2)
7.
Water inlet fitting and water level probe using existing plastic wing nuts - route water inlet probe through
grommet in bulkhead with ice thickness probe wire
8.
1-1/2" bushing in water inlet bracket
9.
Water inlet hose through bushing on back of bracket to water inlet fitting
10.
New control board
11.
Trough protectors
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
Web Site - www.manitowocice.com
7601193 (F-STYLE OR NON-MANITOWOC BIN)
7601223 (S-STYLE MANITOWOC BIN)
Q-DUAL WATER TROUGH/CURTAIN REPLACEMENT
Installation Instructions
8006823
Sheet 1 of 3
03/25/02
Advertisement
Related Manuals for Manitowoc F-STYLE OR NON MANITOWOC BIN 7601193
Summary of Contents for Manitowoc F-STYLE OR NON MANITOWOC BIN 7601193
- Page 1 Water inlet hose through bushing on back of bracket to water inlet fitting New control board Trough protectors Manitowoc Ice, Inc. 2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Web Site - www.manitowocice.com...
- Page 2 Water Water Pump Trough Protector Water Inlet Hose 1 1/2" Bushing Water Trough #10-32 Mounting Screws Q-DUAL INSTALL DATA Deflector Water Inlet/Water Level Bracket Assembly Figure 1 Water Curtain Water Level Hole Plug Splash Shield Dump Hose Water Pump Supply Hose Frame Angle 8006823 Sheet 2 of 3...
- Page 3 WATER INLET BRACKET Wing Nut Bushing Water Level Probe Water Inlet Bracket Wing Nut Water Inlet Fitting Figure 2 WATER PUMP SUPPLY POSITION AFTER ROTATING PUMP HOUSING Figure 3 (Top View) 8006823 Sheet 3 of 3 03/25/02...