Advertisement

Quick Links

20V
LITHIUM-ION
510MM CORDLESS
HEDGE TRIMMER
20VHTG IM ed6.indd 1
Black
Magenta
Cyan
Yellow
Code: 20VHTG
Date: 130614
Edition: 6
INSTRUCTION MANUAL
Op: MW
20VHTG
28/8/13 8:09:47 AM

Advertisement

Table of Contents
loading

Summary of Contents for 909 20VHTG

  • Page 1 INSTRUCTION MANUAL 20VHTG LITHIUM-ION 510MM CORDLESS HEDGE TRIMMER 20VHTG IM ed6.indd 1 28/8/13 8:09:47 AM Code: 20VHTG Black Magenta Cyan Yellow Date: 130614 Edition: 6 Op: MW...
  • Page 2: Table Of Contents

    CONTENTS Warranty Warranty Power Tools Introduction For full details please visit us at www.909.com Environmental protection Description of symbols Specifications General safety rules Additional safety rules for hedge trimmers Additional safety rules for the charger Additional safety rules related to the battery pack and battery safety...
  • Page 3: Environmental Protection

    T-130˚C Manual before using your new 909 Power Tool. Take special care to heed the Cautions and Warnings. Your 909 power tool has many features that will make Specifications your job faster and easier. Safety, performance, and dependability have been given top priority in the...
  • Page 4: General Safety Rules

    When operating a power tool outdoors, use an designed. extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 20VHTG IM ed6.indd 4 28/8/13 8:09:49 AM...
  • Page 5: Additional Safety Rules For Hedge Trimmers

    Ensure the switch is in the off position before • Keep hands and fingers well away from the blade. inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents. 20VHTG IM ed6.indd 5 28/8/13 8:09:49 AM...
  • Page 6: Additional Safety Rules For The Charger

    Wear goggles • Do not plug anything other than your 909 battery pack Wear ear defenders into the charger, as other objects may touch dangerous Wear a breathing mask...
  • Page 7: Additional Safety Rules Related To The Battery Pack And Battery Safety

    If the tool or charger is damaged in any way. • If the battery pack is not charged within the time frame as • Use only the 909 batteries supplied with the 909 Tool or specified in this manual, turn charger off. 909-approved replacements. •...
  • Page 8: When To Charge The Battery

    Rinse your eyes well (for at least 10 minutes) with clean • 20V4BATG: 20V Lthium-Ion 4.0Ah Extra Run Time Battery water, and consult a doctor immediately. Do not use a leaking battery. • 20VCHG: 20V Fast Battery Charger 20VHTG IM ed6.indd 8 28/8/13 8:09:50 AM...
  • Page 9: Know Your Product

    1. Rear handle trigger switch 2. Front handle bar switch 3. Front handle 4. Battery release tab 5. Guard 6. Blade 7. Battery/Plug pack charger - 3-5 hour 8. Battery LED’s 9. Battery 20VHTG IM ed6.indd 9 28/8/13 8:10:01 AM...
  • Page 10: Unpacking

    Due to modern mass production techniques, it is unlikely devices. Running the tool at close to maximum load, or that your 909 Power Tool is faulty or that a part is missing. continual resetting of the overload will cause the battery If you find anything wrong, do not operate the tool until the pack to over heat.
  • Page 11: Fitting And Removing The Battery Pack

    The red light will always glow red when the charger is connected and power is available. 4. When the battery is charged, the green light will no longer glow. The battery is now fully charged. 20VHTG IM ed6.indd 11 28/8/13 8:10:03 AM...
  • Page 12: Safety Features Incorporated With Tools Using This Battery Pack

    When the battery pack has cooled down it can again be used to operate the tool, as long as the load or the conditions causing the original excessive temperature has been corrected. 20VHTG IM ed6.indd 12 28/8/13 8:10:04 AM...
  • Page 13: Using The Hedge Trimmer

    Always use two hands to hold the tool. One on the rear WARNING. Do not let the blade come into contact with handle and one on the front loop handle. fencing wire or any other object that could damage it. 20VHTG IM ed6.indd 13 28/8/13 8:10:06 AM...
  • Page 14: Pruning

    WARNING. Switch off and remove the battery before lubricant spray). carrying out any maintenance on the tool. After each use, clean the blades and lightly lubricate with general purpose oil or spray lubricant. 20VHTG IM ed6.indd 14 28/8/13 8:10:06 AM...
  • Page 15 20VHTG IM ed6.indd 15 28/8/13 8:10:06 AM...
  • Page 16 20VHTG IM ed6.indd 16 28/8/13 8:10:08 AM...

Table of Contents