User Manual 49290 31CC 4 STROKE BRUSHCUTTER, LINE TRIMMER www.909.com Read all safety warnings and all instructions thoroughly before operating this product. 49290 909 BC/LT IM ED2.indd 1 8/02/2017 11:00 AM...
Maintenance and Cleaning / General Inspection / Repairs Maintenance / Air Filter Maintenance / Fuel Filter Checking the spark plug / Servicing Storage & Maintenance Environmental protection Service Support Accessories and After Sales parts Troubleshooting Specifications 49290 909 BC/LT IM ED2.indd 3 8/02/2017 11:00 AM...
These on its Congratulations on the purchase of your 909 31cc 4 Stroke Brushcutter / Line Trimmer. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
Use at a distance of at least 15m from other people. Choke control Start position (choke closed). tion Run position (choke open). Noise label rating 80dBA (taken at 7.5 metres) you must wear ear protection at all times. 49290 909 BC/LT IM ED2.indd 5 8/02/2017 11:00 AM...
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. a. If d Unmodified plugs and matching outlets will reduce risk of electric shock. 49290 909 BC/LT IM ED2.indd 6 8/02/2017 11:00 AM...
Page 7
If devices are provided for the connection of dust extraction and shock. collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 49290 909 BC/LT IM ED2.indd 7 8/02/2017 11:00 AM...
Page 8
Use of the power tool for operations different from those intended could result in a hazardous situation. 49290 909 BC/LT IM ED2.indd 8 8/02/2017 11:00 AM...
• Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank. Wear eye protection. Wear hearing protection. ool for dous Wear headwear protection. Wear safety gloves. Wear safety footwear. 49290 909 BC/LT IM ED2.indd 9 8/02/2017 11:00 AM...
• Inspect and clear the area of any hidden objects such as glass, stones, concrete, fencing, wire, wood, metal, etc. 49290 909 BC/LT IM ED2.indd 10 8/02/2017 11:00 AM...
Page 11
Blade thrust may occur without warning if the blade snags, stalls or binds. This is more then likely to occur in areas tones, where it is difficult to see the material being cut. 49290 909 BC/LT IM ED2.indd 11 8/02/2017 11:00 AM...
DO NOT THREAD the dipstick into the reservoir. Hold the dipstick in place for a few second and then remove (Fig B). AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 12 8/02/2017 11:00 AM...
Page 15
The Sealing O ring on the shoulder of the dipstick should be fully compressed when the dipstick is firmly hand tightened. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 13 8/02/2017 11:00 AM...
4. When the shaft is located, tighten the shaft locking lever (13) to secure both shafts in place Click (Fig. H). AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 14 8/02/2017 11:00 AM...
3. Insert the J handle (12) into the J handle clamp (43) and align the hole in the clamp with the hole through the J handle (Fig J/K). ALIGN HOLES AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 15 8/02/2017 11:00 AM...
Page 18
J handle is secure. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 16 8/02/2017 11:00 AM...
(Fig R). Then proceed to follow the instructions from point 3 in the previous section “Connecting the J handle to the Upper shaft”. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 17 8/02/2017 11:00 AM...
5mm allen key (37) tighten in a clockwise direction until secure (Fig. U). AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 18 8/02/2017 11:00 AM...
(Fig. W), with the square black plastic support where the straps interweave, located on your back. (Fig. X) Re shoo AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 19 8/02/2017 11:00 AM...
255mm, and the Bore size is 25.4mm. Do NOT proceed if the cutter is different to these specifications. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 20 8/02/2017 11:00 AM...
Page 23
8. Whilst holding the supplied allen key (37) in position to lock the spindle, use the supplied spark plug spanner / blade nut wrench / screwdriver combination (36) AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 21 8/02/2017 11:01 AM...
Fresh unleaded fuel must be used in this unit. Do NOT use ethanol based fuels. Do NOT mix oil with fuel. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 22 8/02/2017 11:01 AM...
(33). Use gloves to fit the clip-on line trimmer guard attachment (33) to avoid injury. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 23 8/02/2017 11:01 AM...
Lift the gearbox end of the lower shaft (15) to gain access to the spindle (20). AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 24 8/02/2017 11:01 AM...
(20). Remove the allen key (37) locking the spindle (20) once the spool and line assembly (35) has been removed. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 25 8/02/2017 11:01 AM...
AO). Depressing the bump knob (34) slightly while rotating can assist in rotating the bump knob (34). AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 26 8/02/2017 11:01 AM...
Page 29
(15) for this process, ensure it is correctly fitted as per the instructions on CLOCKWISE page 24. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 27 8/02/2017 11:01 AM...
(Fig AT). 3. Remove all the existing line from the spool completely (Fig AU). AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 28 8/02/2017 11:01 AM...
Page 31
AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 29 8/02/2017 11:01 AM...
It may be twisted or trapped under over laying line. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 30 8/02/2017 11:01 AM...
The bump knob (34) should only touch the ground when the bump knob (34) is tapped on the ground to extend the cutting line. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 31 8/02/2017 11:01 AM...
If this is the case, stop the engine and manually advance the line. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 32 8/02/2017 11:01 AM...
• Never attempt to refuel the engine while it is running or still warm, allow it to cool before fuelling. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 33 8/02/2017 11:01 AM...
(Fig BC). NOTE. For cold starting this is an important step. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 34 8/02/2017 11:01 AM...
Page 37
(8). This will disengage the start trigger lock button (7) and the motor will reduce to Idle speed. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 35 8/02/2017 11:01 AM...
As soon as the motor starts release the throttle so the motor runs at idle speed and disengages the clutch. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 36 8/02/2017 11:01 AM...
“STOP” and a directional arrow. Also indicated on the side of the handle housing by an “O”. 3. The engine will now stop. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 37 8/02/2017 11:01 AM...
Do not perform any maintenance procedures with the motor in operation. Ensure the motor has stopped, and the on/ off switch is in the STOP position. The spark plug lead should be removed from the spark plug. Only use original 909 replacement parts when component parts require replacement. Repairs Repairs beyond those described above, should only be undertaken by trained personal.
Replacement air filters are available for purchase from our website www.extrabattery.com.au. or by calling our Customer Service line on 1800 909 909. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 39 8/02/2017 11:01 AM...
Replacement fuel filters are available for purchase by from our website www.extrabattery.com.au or by calling our Customer Service on 1800 909 909. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 40 8/02/2017 11:01 AM...
• It is recommended once you first use your product to get it serviced after 15 hours of use. • From thereafter, service the product every 2 years. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 41 8/02/2017 11:01 AM...
2 to 3 times in order to distribute the oil evenly. Replace the spark plug. AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 42 8/02/2017 11:01 AM...
You can also find our most updated listing on our website www.powertoolsupport.com, by clicking on the Service Agent link. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №. BC35TS-2 • 49290 49290 909 BC/LT IM ED2.indd 43 8/02/2017 11:01 AM...
Service Agent. DO NOT continue to use the product. For other issues not covered in this chart, please call Customer Service on 1800 909 909. AFTER SALES SUPPORT 1800 909 909 e-mail: info@909.com (toll free) MODEL: №.
Line Trimmer. 8,073 10,120 This product complies with: EN ISO 11806-1:2011 AfPS GS 2014:01 EN ISO 14982:2009 AFTER SALES SUPPORT e-mail: info@909.com 1800 909 909 MODEL: №. BC35TS-2 • 49290 (toll free) 49290 909 BC/LT IM ED2.indd 46 8/02/2017 11:01 AM...