Summary of Contents for Olimpia splendid TECHNO TORRE CERAMICO
Page 1
OSCILLATING CERAMIC HEATER with REMOTE CONTROL TECHNO TORRE CERAMICO READ AND SAVE THIS INSTRUCTION Read carefully before attempting to assemble, install, operate or maintain the heater. Protect yourself and others by observing all safety information. Failure to comply with instruction could result in personal injury and/or property damage.
Page 2
(AC220-240V/50Hz) 3. The appliance is not intended for use by young children or infirm persons without adequately supervision; Young children should be supervised to ensure that they do not play with the appliance. 4. To reduce the risk of electric shock, this plug is intended to fit in a correct outlet. If the plug of heater does not fit fully in the outlet, contact a qualified electrician.
OPERATION Control Panel: (Figure 4) The heater may be operated by the manual controls located on the heater(as shown in FIGURE 4) or by the remote control(as shown in FIGURE 5) The heater must be placed on a flat floor or the tip-over switch will shut it off automatically. 1.
DAMP LOCATIONS Remote control: (Figure 5) Figure 5 1. Plug the heater into outlet and open the power switch on the side of the unit base. 2. Press the POWER button will start the heater. 3. The MODE, TIMER and OSC. buttons function in the exact same manner as listed in steps 3 through 7 of the operating instructions listed above.
MAINTENANCE WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. DO NOT IMMERSE HEATER IN WATER. CLEANING: Clean the heater rear intake grills with the vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt form the air intake of the heater. DO NOT ATTEMPT TO TAKE HEATER APART.