6A-7500 Martin Grove Rd. Woodbridge, ON. Canada L4L 8S9 Toll Free: 1.888.790.5900 E-mail: info@logenex.com For complete information please visit our website at www.logenex.com
Teledoorbell x series
teledoorbell s series (24 pages)
Summary of Contents for Logenex MDUV4-LX
Page 1
Don't open your door to the unknown ADMDUV4 or ADMDUV4VC (Video Model) CMDUV4 Speaker Port Power Plug & 6A-7500 Martin Grove Rd. Woodbridge, ON. Canada L4L 8S9 Toll Free: 1.888.790.5900 E-mail: info@logenex.com For complete information please visit our website at www.logenex.com...
Features and Parts Listings D.O.C. NOTICE: The Canadian Department of Communications label identifies certified equipment. The certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, user should ensure that it is permissible to connect to the facilities of the local telecommunications company.
Installation Instructions Connections CMDUV4 Speaker Port Power Plug Relay 1 & 2 2-Relay Port (Relay#1 and Relay#2) This is the relay port connection. Both relays are Normal Open. Relay#1 (which is activated by ) is a 6 second contact closure configuration Relay#2 (which is activated by ) is a 10 second contact closure configuration Unit #104 Phone Line IN/OUT...
Page 5
Installation Instructions Installation Note Surface mount the MDU Speaker Installation of the system requires that the installer install a 2-conductor wire 22 AWG, (Max Length 1000 ft) or CAT-5 wiring (for Video/Audio speaker option, Max Length 250 ft) from the location of the Door Station Speaker to the system control unit.
Installation Diagram 16V AC CMDUV4 Output Relay 1 & 2 Speaker Station Power Jack Use a 2-conductor wire 22 AWG, (Max Length 1000 ft) or CAT-5 wiring (for Video/Audio speaker option, Max Length 250 ft) from the location of the Door Relay#1 Station Speaker to the system control unit.
Programming and Installers Guide Programming PRESS to go into programming mode (Listen for 2 beeps) ENTER passcode 1111 (Default Passcode) Then listen for Beeps NOTE: When Entering any programming functions, you have up to 30 seconds idle time before the system will hang up at which point any programming started will not be saved PRESS (Listen for 1-Beep)
Trouble Shooting In case of difficulty, try the following suggestions before seeking assistance Problem Solution Controller not responding 1) Check your AC and power adapter, confirm LED Power Indicator is FLASHING 2) Check the power connection into the unit My phones don't work 1) Are your phones wired into the (RJ31X CA38A)
Page 1 of 2 Limited Warranty Logenex Innovations Inc. warrants the original purchaser that for a period of one (1) year from the date of purchase, the product shall be free of defects in materials and workmanship under normal use.
Page 10
Return Number (RMA). Products which Logenex Innovations Inc. determines to be repairable will be repaired and returned. A set fee which Logenex Innovations Inc. has predetermined and which may be revised from time to time, will be charged for each unit repaired.