Introduction - The Pool Factory Saltwater 5000 Series Installation Manual

INTRODUCTION:

Congratulations on becoming the owner of a new above ground swimming pool. This is the instruction packet
for installing your swimming pool. The following are some helpful hints that you should take into consideration
before installing your pool.
1) Read through the entire instruction booklet before you begin. This will enable you to find out exactly what is
involved with installing your swimming pool before you begin. While you are going through the instructions,
please be aware that all of the diagrams are representative of a 15' x 30'/18' x 33' pool. If you have a different
size pool you will find that your pool has a different number of uprights than the ones in the diagrams.
2) DO NOT A TTEMPT INSTALLATION IN WINDY OR GUSTY WEATHER . This will not only make
installation more difficult, it may result in damage to your pool before it is completely installed.
3) Although we have broken down the installation into many simple steps, you will probably find that Steps 1
and 2 will be the most labor intensive and time consuming steps. Once you have completed those two steps
you should find that the rest of the installation moves along much more quickly.
4) Please be sure to review all safety material and local codes before beginning your installation. There is a yellow
safety envelope packed with your pool. This envelope contains safety material and warning stickers to be
placed on your pool. If you are missing any of these items please contact your dealer or the factory to obtain it.
The warranty is void if all safety precautions are not followed.
5) In the event that you need to make a warranty claim, it is important to know the size and model of your
swimming pool in order to expedite the handling of your claim. Please fill in the information below and keep
for your records. All of this information can be found on the labels attached to the cartons your pool is packed in.
NAME OF POOL:
SIZE OF POOL:
DATE OF PURCHASE:
NAME OF POOLW ALL:
NAME OF LINER:
6) Make sure you have the necessary tools and materials before beginning your installation.
Below is a list of the tools and materials needed.
- Shovel
- Tape measure
- Phillips head screwdriver
- Duct tape
- Sand
- Filter
- Skimmer/Return fitting
- Carpenters level and/or transit (Optional)
- Patio Blocks (2" x 8" x 16")
- Box cutter (Razor blade)
- Tamp
- 5/16" wrench
- 1/4" wrench