Erasing Results - HMM Diagnostics smartLAB indi User Manual

will power off. In the reviewing mode, it will automatically power off after
1 minute of no use. Alternatively, you can press the "START" button to shut
down the smartLAB
• If no memory is stored (or all memories have been deleted), the LCD will
show "0" for systolic, diastolic and "00"for the numbers of memory,
heart rate. By pressing the "MEM" or "START", the monitor will power
off.

Erasing results

When any result is displayed, keep on
pressing button "MEM" for three seconds,
and all results in current memory bank
indi.
®
• The Bi-classification LED
will also indicate the
blood pressure
classification.
• Press "MEM" button
again after the last
memory, the monitor
19