the minute is twinkling, then the time and date is confirmed.
• Your smartLAB
indi will turn off automatically after 1 minute of
®
no operation with the time and date unchanged.
• Once you change the batteries, you will have to readjust clock.
Connecting the cuff to the monitor
The cuff is attached to your smartLAB
indi when it is packaged. Should the
®
cuff become unattached, align the two plugs and four brackets of the cuff
with the plug sockets and bracket sockets of the monitor and press the cuff
to the monitor until the plugs and brackets are securely attached.
14