CAUTION: Do not remove data
plates from fireplace. Data plates
contain important warranty and
safety information.
1. Remove fireplace and mantel from carton.
Log is wrapped and inside fireplace. Do
not.remove.at.this.time.
Brick.Liners
Screen.
Log
Control.Knob
ALL-IN-ONE ASSEMBLY
This. all-in-one. assembly. comes. with. the.
fireplace already installed in the mantel for
easy.installation.
121623-01A
UNpAckING
pRODUcT IDENTIFIcATION
Piezo Ignitor
Access.Door
Figure 1 - All-In-One Fireplace (Mantel Not Shown)
pRODUcT FEATURES
www.desatech.com
2.. Remove.all.protective.packaging.applied.
to fireplace for shipment.
3. Make sure fireplace includes one hard-
ware.packet.
4. Check fireplace for any shipping damage.
If fireplace is damaged, promptly inform
dealer where you bought fireplace.
5.. Remove. hood. from. shipping. location.
inside.back.of.mantel..Discard.screws.
Gas.Line.
Access.Hole
SAFETY PILOT
This fireplace has a pilot with an Oxygen
Depletion. Sensing. (ODS). safety. shutoff.
system. The ODS/pilot is a required feature
for vent-free room fireplaces. The ODS/pilot
shuts off the fireplace if there is not enough
fresh.air.
5