Makita HANDY VAC II 4071D Instruction Manual page 9

Turn the pre-filter and pull
it
off toward
you, emptying out the fine dust inside.
Then take out the filter and tap out any
adhering dust.
After emptying out the cleaner, re-assemble in the order shown in the figure.
1 . Fit filter snugly on all the way.
2. Slip on pre-filter.
3.
Screw on the capsule.
I
Capsule Pre-f ilter Filter
I
CAUTIONS:
0
Failure to re-assemble the filter and/or pre-filter so that they
are
back on all the way,
or using a broken or ripped filter, can cause dust to
get
into the motor and result in a
fa i I u
re.
Screw the capsule tightly into place. Tighten accessories (crevice tool, etc.) in the same
direction
as
the capsule screws on.
After use
When recharging or storing the cleaner,
hang the cleaner from a nail using the con-
v e n i e n t hanger
in back.
9