Makita XSV10 Owner's Manual

Owner's
Manual
Wet/Dry Vacuum
Model XSV10
FOR COMMERCIAUNDUSTRIAL USE
Makita Limited One Year Warranty
Every Makita tool is thoroughly inspected and tested before leav-
ing the factory. It is warranted to be free of defects from work-
manship and materials for the period of ONE YEAR from the
date of original purchase. Should any trouble develop during this
one-year period, return the COMPLETE tool, freight prepaid, to
one of Makita's Factory or Authorized Service Centers.
If
inspec-
tion shows the trouble is caused by defective workmanship or
material, Makita will repair (or at
our
option, replace) without
charge.
This Warranty does not apply where:
repairs have been made or attempted by others
repairs are required because
of
normal wear and tear
The tool has been abused, misused or improperly maintained
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDI-
RECT, INCIDENTAL
OR
CONSEQUENTIAL DAMAGES FROM
THE SALE
OR
USE OF THE PRODUCT. THIS DISCLAIMER
APPLIES BOTH DURING AND AFTER THE TERM OF THIS
WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WAR-
RANTIES, INCLUDING IMPLIED WARRANTIES OF "MER-
CHANTABILITY" AND "FITNESS FOR A SPECIFIC PUR-
POSE," AFTER THE ONE-YEAR TERM OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Some states do
not allow the exclusion or limitation of incidental
or
consequential
damages, so the above limitation or exclusion may not apply to
you. Some states do not allow limitation on how long an implied
warranty lasts, so the above limitation may not apply to you.
Attention:
Read all safety rules
carefully before
attempting to operate.
Retain for future reference.
UL Listed.
A
DANGER
Never operate this
unit
when
flam-
mable materials or vapors are pre-
sent because electrical devices
produce arcs or eparks that can
cause a fire or explosion.
Model XSVlO Type 2
This Makita Industrial vacuum cleaner is designed for both wet and
dry applications. This model includes a stainless steel tank assembly,
1.7 HP (Peak) two-stage by-pass motor and an 18' power cord.
Standard accessories include a 12' x 1 '/2" crushproof hose, 2-piece
-
1 l / ~ " chrome plated interlocking extension wands, 14" metal master
nozzle, 14" brush insert, 14" squeegee insert, cartridge filter, and
heavy-duty 3-wheel dolly for easy mobility. Each model incorporates
an automatic shut-off water level float.
Capacity
XSV-10Type2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10gallons
Intake size
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.2l/2" dia.
Volume flow rate
(2'/2''
Orifice)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
100 CFM
Static Pressure.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80" water
Rated current drain
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.6.5 Amps
Power supply required
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
120Volts, 60Hz
Cordlength
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 8 ~ .
Approval
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ULListed