1. Manuals
  2. Brands
  3. Ask Manuals
  4. Projector
  5. IMPRESSION A10+
  6. User manual

Ask IMPRESSION A10+ User Manual

Flash upgrade user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FLASH UPGRADE
USER GUIDE
IMPRESSION
A10+/A9+/A8+

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMPRESSION A10+ and is the answer not in the manual?

Questions and answers

Related Manuals for Ask IMPRESSION A10+

Summary of Contents for Ask IMPRESSION A10+

  • Page 1 FLASH UPGRADE USER GUIDE IMPRESSION A10+/A9+/A8+...

  • Page 3: Table Of Contents

    FLASH UPGRADE USER GUIDE 1. TABLE OF CONTENTS TABLE OF CONTENTS ...1 INTRODUCTION...4 NEEDED MATERIAL...4 CONNECTING THE CABLES ...5 CONFIGURING THE HYPERTERMINAL SOFTWARE ...5 SENDING THE FILE (SW&HW) ...7 FINISHING THE FILE TRANSFER ...8 VERIFYING THE DOWNLOAD ...8 This publication is printed on recycled paper The information contained in this User Guide, and the products described herein are subjected to change without prior notice.

  • Page 4: Introduction

    FLASH UPGRADE USER GUIDE IMPRESSION A10+/A9+/A8+ 2. INTRODUCTION This User Guide has been created to provide an easy to understand description on how to flash upgrade the SW on projectors that are prepared for this in the field. It describes the methodology and the correct software and hardware to use to perform flashing without any hassle.

  • Page 5: Connecting The Cables

    FLASH UPGRADE USER GUIDE 4. CONNECTING THE CABLES The Flash upgrade is done via the serial mouse port on the projector. This is the communication interface from the computer to the projector. All PC/notebooks are equipped with serial interface connectors, and may thus be used for this purpose. Connect the computer to the projector using the regular VGA cable.

  • Page 6: Please Note

    FLASH UPGRADE USER GUIDE The settings to use depend on the current communication settings on the projector in question. Check the ADVANCED /SERVICE / INFO dialog box in the projector menu to see the current communication settings to use. Change the settings in Hyperterminal so that it matches the communication settings in the projector.

  • Page 7: Sending The File (Sw&Hw)

    FLASH UPGRADE USER GUIDE 6. SENDING THE FILE (SW&HW) 1. Flashing the SW EPROM: Type RRP;38400 and press Enter. 2. Flashing the HW EPROM: Type FPG;38400 and press Enter. It is not necessary to use capital letters, but the command must be written exactly as described, otherwise the projector will return “Undefined Command..”.

  • Page 8: Finishing The File Transfer

    FLASH UPGRADE USER GUIDE 10. Press “Send”. The file will be transferred and the status and progress can be seen in the “Hyperterminal” status window. You will not receive visual feedback on the projected image during flash except the indicator stating time left and the progress of the EPROM flashing.

This manual is also suitable for:

Impression a8+A9+Impression a9+

Table of Contents

Save PDF