temperature. Now take a pastry brush and INSTALLATION AND OPERATING spread vegetable oil, butter, or grid release agent INSTRUCTIONS on both grids. The waffle baker should then be closed for five to ten minutes. The baker is now RELEASE AGENT CAUTION ready for use.
ungrounded systems, attach the green adaptor to a known permanent ground. CLEANING Clean outside of baker every day that it is in use. Do not clean grids unless a buildup of carbon forms. On bakers that do NOT have teflon coated grids, in order to remove carbon from grids, disconnect waffle baker from current, place cloth over bottom grid, soak with ammonia, close...
Page 4
WAFFLE BAKER TROUBLE SHOOTING GUIDE TROUBLE CAUSE REMEDY Bakes waffle too slow Mix or batter too cold - just out Allow mix to come to room of refrigerator temperature before baking Adjust thermostat or replace Temperature set too low thermostat grid. Thermostat should be 400 to 420 after 2 cycles with grids open Have line voltage checked...
2E-05-07-0052 Lead-In-Cord, Nema #6-15P (240V) IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
Need help?
Do you have a question about the B810 and is the answer not in the manual?
Questions and answers