ATEN KN4164Vl User Manual page 174

KVM over IP Switch User Manual
When the Enable Adapter ID function is enabled (the default) the switch
stores adapter cable information for each of its ports, so that when you
move a KVM Adapter Cable from one port to another, it remembers the
adapter cable's port properties information at the new location (see The
Adapter ID Function, page 34).
If Enable First Logon Transfer is enabled, only the first user on a bus can
switch ports. Other users on the bus cannot switch ports unless there is a
bus that is already connected to the port they would like to access, or there
is a free bus available. (For details regarding users and buses, see Users
and Buses, page 219.)
For the Keyboard/Mouse Broadcast setting, drop down the list to make
your choice.
If you enable Keyboard Broadcast, your keystrokes will be duplicated
on all the attached servers that currently appear in the Sidebar.
If you enable Mouse Broadcast, your mouse movements and clicks
will be duplicated on all the attached servers that currently appear in
the Sidebar.
Note: 1. On a KVM switch that is cascaded from the KVM over IP
switch, only one port can perform a Keyboard/Mouse
broadcast at a time.
2. For Mouse Broadcast, you and all the servers must be running
the same OS; all the monitors must have the same resolution;
and all the screens must have an identical layout.
The Console Keyboard Language setting lets you specify which keyboard
mapping is being used by the Local Console keyboard. Drop down the list
to make your choice.
156