Advertisement
LED-PAR 631 INT ACCU
User Manual
A. SPECIFICATION
1. Voltage: AC 100V-240V, 60Hz/50Hz (only power in, no power out)
2. Battery: 11.1V, 12AH
3. LED: 6*Tri-3W
4. Power consumption: 30W
5. Fuse: 1A/250V
6. Stand by time: 7 hours（RGB）
7. Charging time: 8 hours（LED blackout when the device is charging）
8. Operation mode: LCD display
9. Control feature: Built-in programs, auto running mode, DMX mode, master/slave mode, sound-active
mode, and static color
10. DMX channels: 2, 3, 5CH
11. DMX communication mode: 2.4GHz wireless communications (received), XLR3 wired connection
12. Wireless module: Sweden W-DMX TRx 2.4G WIFI, 2dBi Antenna
B. OPERATION
This fixture with rich effect programs, LCD dislay for easier operation, there are 6 working modes:
Auto running mode
Built-in programs mode
Sound-active mode
Static color mode
DMX mode
Master/slave mode
(When set the programs parameters, the cursor will stop and flicker, press the "UP" or "DOWN", the
parameter will change accordingly.)
1. Built-in Programs Mode
1) Press the "MODE", enter into built-in programs mode "Program Mode".
2) Press the "SETUP", enter to select the operation programs menu "Program: 01".
3) Press the "UP" or "DOWN", select the operation programs effect "01-09".
4) When the LCD displays shows "Program
: 01", press the "SETUP" to edit the static color. Press the
Advertisement
