Summary of Contents for Pro-Sl LED-PAR 631 INT ACCU
-
Page 2: Specification
LED-PAR 631 INT ACCU User Manual A. SPECIFICATION 1. Voltage: AC 100V-240V, 60Hz/50Hz (only power in, no power out) 2. Battery: 11.1V, 12AH 3. LED: 6*Tri-3W 4. Power consumption: 30W 5. Fuse: 1A/250V 6. Stand by time: 7 hours（RGB） 7. Charging time: 8 hours（LED blackout when the device is charging）... - Page 3 “UP” or “DOWN” to select the static colors. Color Yellow Green Cyan Blue Purple Rosiness White 5) When the LCD display shows “Program : 02”-“Program : 09”.Press the “SETUP”, enter to set the operation speed of programs “Speed: 080”. 6) Press the “UP” or “DOWN”, set the speed value “001-100”. 7) Press the “SETUP”, enter to set the strobe speed menu of operation programs “Flash: 000”.
- Page 4 90—99 Program:02 100—109 Program:03 110—119 Program:04 120—129 Program:05 Speed 130—139 Program:06 0—255 140—149 Program:07 150—159 Program:08 160—169 Program:09 Sensitivity 170—255 SOUND 0—255 DMX mode2: 03 CHs Green Blue DMX mode3: 05 CHs, Red 0-255 Green 0-255 Blue 0-255 Dim 0-255 Flash 0-255 5.
- Page 5 5) If the fixture is operating wire DMX mode, close the wireless DMX mode to avoid interference between signals. 6) When setting the wireless DMX function, it will cause operation failure if interfered by wireless DMX signals. Then power-out and power-on, it will recover to work. 8.
- Page 6 1) Press “ON/OFF”，turn off the IR Remote； Press “ON/OFF” again，recover to the previous state. 2) When in OFF state, press down “9” + “8” + “7” respectively to recover factory settings. 3) Once recover the factory settings, wireless DMX is open to receive signals. Need to reset the parameter according to your application.
- Page 7 3) Communication with a emitter, but no DMX data: the indicator will lighting for 900ms, and then put out for 100ms, will flicker slowly; 4) When wireless DMX communication is normal: the indicator light will always on The device cannot receive DMX wireless signal and DMX cable signal at the same time. When the device working in built-in programs mode, auto running mode, sound-active mode, static color mode, please ensure that the matching 2.4GHz DMX wireless signal transmitter doesn’t work, or can’t send DMX signal.